Teton Homes Features Chassis

2008 Teton Standard & Optional Features

Chassis

K E Y	N	Indicates not available	RO	Indicates Teton® Royal
	S	Indicates a standard feature
			EX	Indicates Teton® Experience
	O	Indicates an optional item

Due to Teton's continual product improvement, specifications and features
are subject to change without prior notification or obligation. Not all options
or combinations of options are available on all floor plans.

RO	EX	Chassis
S	S	Patented chassis design, which provides for Teton's Big & Tall storage
S	S	Heavy-duty payload third axle – added carrying capacity (n/a Sunrise – this is a two-axle unit only)
O	O	Upgrade to G-rated tires (standard on Sunrise, Reliance, and Scottsdale); D-rated standard otherwise
S	S	Aluminum wheels (spare is steel)
O	O	Tire pressure monitoring system (for truck and trailer – available for nine, ten, and twelve wheels)
S	O	Moor/rye “IRE” suspension system (with height adjustment of both 1 ½” and 3” taller)
O	O	Entire coach raised up an additional 3” for taller trucks – note jack legs, stabilizer jacks, and entry steps will be 3” higher off the ground, which may require extra blocking
O	O	Dexter Axle Air flex Air Ride suspension with basic air package with single height control and mechanical dump valve
S	S	Hydraulic rear stabilizer jacks with independent control
S	S	No-pin hydraulic front leveling jacks
O	O	Lippert heavy-duty front leveling jacks (standard on Reliance and Scottsdale models)
S	S	Hand-held Teton Homes exclusive pendant-style jack leg control – allows a single person to control all four jack legs
O	O	Big Foot hydraulic leveling system (three axles only)
O	O	Electric/hydraulic disc brakes
O	O	Air/hydraulic disc brakes
O	O	TrailAir air ride pin box – 24,000 lb. rating
O	O	Reese swivel and tilt hitch
S	S	Prepped for a bolt-on rear receiver hitch for a bicycle carrier
O	O	Rear receiver hitch (2” square) and wiring for a bicycle carrier (300 lb. vertical load)
S	S	Spare tire and wheel on hanger winch below floor
O	O	66” skid roller bar in lieu of skid plates
S	S	Hickory Springs “Big Easy” entry steps – 2” deeper
O	O	Kwikee electric triple entry steps
O	O	Built-in floor safe (9” x 12” 8”) welded into chassis
S	S	Flush-floor dinette slide-out
S	S	Individual slide-out control switches inside main living area
S	S	5/8” tongue-and-groove spruce plywood floor decking
S	S	Fully-enclosed underbelly

Teton Homes® warrants its Ultrastructural framework, a unique blend of wood, steel and polystyrene insulation for 5 years
on Royal models and 3 years on Experience models. The Ultrastructure includes the chassis, the sidewalls, and roof structure.
If, during the ownership of the original buyer, any part of the Ultrastructure fails to perform properly because of faulty workmanship
by Teton Homes®, it will be replaced without charge for either parts or labor if the proper warranty claim procedures are followed.
All other items are covered under the standard Teton® one-Year Limited Warranty unless otherwise indicated. See your owner's
manual and warranty booklets for further details.

Dometic® provides a 3-year limited manufacturer's warranty on their products: Such as the various Dometic®
refrigerators and air conditioners. Suburban® provides a 3-year limited warranty on the tank of the water heater.
The vinyl roof membrane carries a 12-year limited manufacturer's warranty.
Atwood® provides a 2-year limited warranty on their Hydroflame furnaces.

These warranties are subject to the individual limitations of the specific suppliers involved, and are subject to their rules
and guidelines regarding their products. Teton® provides the warranty of the Ultrastructure itself.

Teton Homes © 2007-2010 .......................................................... Site Map > Customer Service > Home

.........................................................................................Website Design Provided By: Waves Web Design